0.01% Oil Quality Change Detection!!!

Equipment Condition Monitoring that Enables Preventative Maintenance and Reduces Operating Costs

The OQSx-G2 sensor is the world’s most precise oil condition monitoring sensor. Its real time oil condition analysis is so accurate and sensitive that it will immediately alert equipment operators to the earliest indications of a problem; well before any material equipment damage. This vital and reliable information is delivered to operators and managers instantly such that preventative maintenance can be actioned and expensive equipment damage and ultimately breakdowns avoided.

This exceptional functionality is achieved using Tan Delta’s unique next generation FSH™ core technology which is integrated in every OQSx-G2 sensor. This innovative and proven technology enables real-time, ultra-accurate, continuous analysis of any oil type, working in any application, from the largest engine or gearbox to turbines and hydraulics, with even the most subtle condition change of as little as 0.01% instantly detected and reported

Unlike other equipment monitoring systems such as vibration or particle counters which are only triggered by symptoms caused after significant damage is well underway and thus repair will already be costly, the OQSx-G2 sensitivity detects and reports trace changes in oil condition which characterize the earliest stages of equipment issues – typically before damage has occurred and thus the issue can be quickly diagnosed and corrected saving considerable cost. 

In addition to early detection of equipment issues OQSx-G2 delivers a broad range of additional benefits that include safely extending maintenance intervals through identification of when equipment needs maintenance rather than time-based schedules and the precise identification of oil end of life and thus a significant reduction in oil usage. In the final analysis, equipment operators see a significant reduction in immediate and long-term equipment operating costs coupled with increased reliability and extended equipment life.

The OQSx-G2 sensor is easy to install on any equipment operating in any environment and with any oil type. And with a typical investment pay back of well under 6 months and a maintenance free life of over 5 years, the financial rational is clear.

Tan Delta Systems offer a range of advanced oil condition-based equipment monitoring solutions, suitable for any industrial or commercial equipment monitoring application. Equipment operators can purchase complete ‘plug & play’ kits direct from us, which are delivered anywhere worldwide within days and can be fitted instantly to any equipment, or if preferred, through one of our network of fully trained and certified distributors. For equipment manufacturers interested in integrating deep-insight oil condition based equipment monitoring into their own products, we offer a range of customised solutions from standard sensors at volume pricing to totally integrated technology solutions suitable for high volume cost sensitive applications such as automotive.

About CIS Industrial Services

CIS Industrial Services ia leader in the supply of advance Oil Condition Monitoring technologies, Vibration Monitoring technologies, products, system and services.

Our products we represent are trusted by the worlds leading industrial and commercial companies to monitor Vibration, and Oil, helping to optimize equipment productivity, reduce operating cost, thereby remaining competitive in a global economy.

Should you wish to lean more about our Products and Services, please do not hesitate to contact Lourens Janse Van Rensburg via email: Lourens-cisindustrial@outlook.com or alternatively via phone: +27 (0) 79 512 8027

Locally Manufactured Anti-Fog Face Shield to Protected Against #COVID19 in the Work Place

Anti-Fog Face Shield Visor

CIS Industrial Services is proud to be part in making a difference in the work place with this locally manufactured Anti-Fog face shield, fit for everyone, in any working environment, might it be an Office, Power Utility or Refinery for that matter. The frame is made of a high quality Polypropylene (PPH13) which make’s it quite durable for your environment. The inter changeable visor has a significant Chemical Resistance, with a 400 micron thickness, which make this unit light and comfortable.

CIS Industrial Services has a manufacturing capacity of 2000 units per day and the colour can be change accordingly based on an order of 200 units or more.

About CIS Industrial Services

CIS Industrial Services are leader in the supply of advance Oil Condition Monitoring technologies, Vibration Monitoring technologies, products, system and services.

Our products we represent are trusted by the world’s leading industrial and commercial companies to monitor Vibration, and Oil, helping to optimise equipment productivity, reduce operating cost, thereby remaining competitive in a global economy.

Should you wish to learn more about our Products and Services, please do not hesitate to contact Lourens Janse Van Rensburg via email: Lourens-cisindustrial@outlook.com or alternatively via phone: +27 (0) 79 512 8027

The best, just got better…

OQSX-G2 Sensor

OQSx-G2 Oil Quality Sensor

The OQSx-G2 is the world’s most advanced and flexible real-time oil quality/condition monitoring sensor. Suitable for application in any commercial or industrial environment from the smallest genset, to the largest engines on ships and Mining equipment.

Easy to install, the OQSx-G2 continually analyses oil in real-time whilst equipment is in operation and provides an accurate statement of oil condition. Any wear or contamination is instantly detected, measured to an accuracy of 0.01%, and reported.

  • FULL SPECTRUM HOLISTIC (FSH™) – Detects all and any Wear and Contamination: water, acid, fuel, viscosity, different oil types, carbon, particles etc.
  • ABSOLUTE ACCURACY – The FSH technology within our sensor enables it to have a oil quality change sensitivity detection of 0.01% (10ppm) with an Accuracy margin of +/-0.5%.
  • REAL-TIME – Continuously analyses oil condition on operating equipment and reports oil condition every two seconds.
  • ROBUST & RELIABLE – Proven around the world for use in even the most extreme industrial and commercial applications.
  • EASY TO INSTALL – Quick and easy to install on any equipment with plug & play integration with any existing data reporting and display systems
OQD Mobile App

OQD Mobile (OQDm)

The OQD Mobile (OQDm) app can be downloaded onto your Android device to enable communication with our OQD Express (OQDe) unit via Bluetooth. This allows you to easily check the readings from any OQDe within a 10m radius and download the logged data to further analysis.

  • WIRELESS CONNECTIVITY – Use your mobile phone to instantly connect by Bluetooth to any OQDe, view and manage live data.
  • LIVE DATA – Display and record real time oil condition.
  • DATA LOG DOWNLOAD – Download logged data for analysis or forwarding to colleagues by email.
  • HEALTH & SAFETY – Allows operators to access data from active machinery at a safe distance.

About CIS Industrial Services

CIS Industrial Services ia leader in the supply of advance Oil Condition Monitoring technologies, Vibration Monitoring technologies, products, system and services.

Our products we represent are trusted by the worlds leading industrial and commercial companies to monitor Vibration, and Oil, helping to optimise equipment productivity, reduce operating cost, thereby remaining competitive in a global economy.

Should you wish to lean more about our Products and Services, please do not hesitate to contact Lourens Janse Van Rensburg via email: Lourens-cisindustrial@outlook.com or alternatively via phone: +27 (0) 79 512 8027

HEAVY MINING EQUIPMENT

Mining and Mineral Processing

The Challenge

Maximising the productivity of large mobile plant equipment was a critical performance criteria for a large mining operation.

The Solution

Intelligent Oil Condition Monitoring deliver a measurable improvement in equipment active operating time.

Oil Quality Sensor (OQSx) were fitted to the Gearbox, Engines and Hydraulic Systems of a total of 36 large plant machines such as Rock Crushers, Excavators and Dump trucks.

Operator alert display units (Oil Quality, OQDe) were fitted in the cabs of each vehicle to provide immediate conditions alerts, whilst data was also streamed back to the maintenance depot where it was used to predict optimal services schedules.

The customer benefited from reduced servicing through being able to maximize the true life of their oil, coupled with reduced equipment wear associated issues.

Tan Delta Oil Quality Sensor

Benefits

Reduced serving through being able to maximize the true life of their oil, and extended the running hours of site critical machinery.

HIGHLIGHTS

Cost Effective

Oil consumption was reduced by over 19% as the sensor showed oil was being replaced when still viable

Reduced Waste

Oil disposal cost were dramatically reduced due to fewer oil changes.

Improved Maintenance Schedules

Equipment failure cost were reduced due to improved maintenance schedules and auditing of correct procedures through analysis of the sensor data

Prevent Catastrophic Failure

Contamination which could have caused serious damage was immediately identified by the sensor allowing instant remedial action.

COMMERCIAL BENEFIT

The site has reduced their annual expenditure on oil consumption alone by over R5m ($360k) thanks to Tan Delta Oil Condition Monitoring products.

To see how we can assist you in saving money, please call Lourens Janse Van Rensburg on +27 (0) 79 512 8027 or alternatively via email, lourens-cisindustrial@outloo.com. Or visit our website:https://cisindustrialservices.com

Plant Uptime • Plant Safety • Asset Reliability