The best, just got better…

OQSX-G2 Sensor

OQSx-G2 Oil Quality Sensor

The OQSx-G2 is the world’s most advanced and flexible real-time oil quality/condition monitoring sensor. Suitable for application in any commercial or industrial environment from the smallest genset, to the largest engines on ships and Mining equipment.

Easy to install, the OQSx-G2 continually analyses oil in real-time whilst equipment is in operation and provides an accurate statement of oil condition. Any wear or contamination is instantly detected, measured to an accuracy of 0.01%, and reported.

  • FULL SPECTRUM HOLISTIC (FSH™) – Detects all and any Wear and Contamination: water, acid, fuel, viscosity, different oil types, carbon, particles etc.
  • ABSOLUTE ACCURACY – The FSH technology within our sensor enables it to have a oil quality change sensitivity detection of 0.01% (10ppm) with an Accuracy margin of +/-0.5%.
  • REAL-TIME – Continuously analyses oil condition on operating equipment and reports oil condition every two seconds.
  • ROBUST & RELIABLE – Proven around the world for use in even the most extreme industrial and commercial applications.
  • EASY TO INSTALL – Quick and easy to install on any equipment with plug & play integration with any existing data reporting and display systems
OQD Mobile App

OQD Mobile (OQDm)

The OQD Mobile (OQDm) app can be downloaded onto your Android device to enable communication with our OQD Express (OQDe) unit via Bluetooth. This allows you to easily check the readings from any OQDe within a 10m radius and download the logged data to further analysis.

  • WIRELESS CONNECTIVITY – Use your mobile phone to instantly connect by Bluetooth to any OQDe, view and manage live data.
  • LIVE DATA – Display and record real time oil condition.
  • DATA LOG DOWNLOAD – Download logged data for analysis or forwarding to colleagues by email.
  • HEALTH & SAFETY – Allows operators to access data from active machinery at a safe distance.

About CIS Industrial Services

CIS Industrial Services ia leader in the supply of advance Oil Condition Monitoring technologies, Vibration Monitoring technologies, products, system and services.

Our products we represent are trusted by the worlds leading industrial and commercial companies to monitor Vibration, and Oil, helping to optimise equipment productivity, reduce operating cost, thereby remaining competitive in a global economy.

Should you wish to lean more about our Products and Services, please do not hesitate to contact Lourens Janse Van Rensburg via email: Lourens-cisindustrial@outlook.com or alternatively via phone: +27 (0) 79 512 8027

Mobius Connect Conference 2020

CIS Industrial Services is at the #Mobius Connect Conference 2020.

Looking forward to engaging with customers/partners whom is like minded and want to progress within the Condition Monitoring world.

If you attending, please let’s connect and have a chat

Data Trending… Optimising Your Maintenance Strategy

Simply gathering information from sensors and systems is not enough to yield the benefits of predictive maintenance.

The ability to collect and then analyse data can be crucial to predicting impending failure.

By investing in an Oil Quality Sensors to influence these maintenance practices, you can  have the benefit of:

  1. Reduce overall maintenance cost by 30%
  2. Reduce sampling cost by up to 80%
  3. Reduce oil purchases and disposal cost by 20%
  4. Increase equipment availability by 5%
  5. and, rule out human induced contamination.

To see how we can assist you in saving money, please call Lourens Janse Van Rensburg on +27 (0) 79 512 8027 or alternatively via email, lourens-cisindustrial@outloo.com. Or visit our website:https://cisindustrialservices.com

Future-Proofing Asset Monitoring at Port…

The infrastructure-heavy operation at seaport, marine and inter-modal terminals, face increasing demand for efficient and cost-effective operation. Advanced equipment and technology underpins port performance, and productivity hinges upon robust asset management.

The majority of port infrastructure (including Container Cranes, Straddle Carriers, Shiploaders and Hoppers) have a useful economic life of up to 50 years, however an increasing portfolio of ageing and expensive assets over time leads to an increase in exposure to business risk. Research suggests that issues resulting from the application of inadequate or incorrect maintenance procedures cause roughly 25% of the total cost of equipment damage and that satisfying short-term operational needs can lead to major asset downtime due to unplanned maintenance and catastrophic failure. 

Increasing global trade is increasing the demand for more infrastructure to combat port congestion problems. Subsequently there has been an increasing industry focus on equipment lifecycle management, and real-time condition monitoring and maintenance strategies as part of a wider approach to the managing of an entire portfolio of assets. 

Oil condition monitoring plays a fundamental role in total asset management. Accurate, high quality oil condition analysis provides a deep insight into the health and status of port equipment. Contamination can quickly lead to oil losing its lubrication properties and equipment damage. Small unseen issues, which if left to develop will cause a major breakdown, are reflected in changes in oil condition, and as oil condition degrades with use, you can pin-point the exact time for maintenance, extending intervals without risk.

Tan Delta sensors were fitted to the primary hydraulic systems of Container Cranes in a busy South African port. An operator panel was installed in each, providing a simple traffic light condition status, whilst live data was streamed back to the maintenance centre. The data enabled the port to extend the intervals between servicing thus reducing direct operating costs, also providing reassurance that in the event of an unexpected issue, an alert would be provided, and action taken in a planned and controlled manner before any equipment damage had occurred. 

“Since the installation we have seen a significant reduction of 32% in our oil consumption. We were replacing our oil prematurely and have since been able to streamline our maintenance across the whole port. With a total project payback of 6 months this technology forms a crucial part of our asset management strategy, and has helped provide complete visibility, tracking and actionable predictive insights across the port”. – Port Operations Manager, South Africa.

Would you like to see how we can save you money?

Contact, Lourens Janse Van Rensburg on +27 (0) 79 512 8027 or alternatively,

lourens-cisindustrial@outlook.com

CIS Industrial Services (Pty) Ltd – Plant Uptime, Plant Safety, Asset Reliability!

Benefits of Oil Analysis

BenefitsOfOilAnalysis
Reduce Breakdown Frequency and Severity. Among the many cost saving benefits and increased productivity associated with fluid sampling, the largest cost savings and benefits come from preventative and proactive maintenance. Fluid sampling and analysis allows technicians and service managers to monitor the condition of equipment systems and to identify and correct minor issues to reduce the risk of severe component failures and breakdowns. Large trucking companies who sample engine oil have saved on maintenance costs by reducing the amount of engine overhauls required by correcting minor problems and treating root causes to reduce the chance of issues from reoccurring. The data obtained through oil analysis can provide crucial details about engine components that would normally require an engine tear down in order to inspect the components. The time required to take a representative fluid sample and send it to the lab can save an enormous amount of time in the future from performing repairs and complete overhauls.

Why Sample?

OilAnalysis

Oil Analysis – Industries have been practicing oil and fluid analysis for several decades as a means of determining the cleanliness of system fluids and the condition of components such as pumps, bearings, motors, valves, and cylinders within a hydraulic system. Fluid sampling allows maintenance managers and fleet operators to examine the components of a hydraulic system on their equipment without having to physically disassemble the system to inspect components for wear. Oil analysis has been proven to reduce maintenance and operating costs and increase both equipment reliability and productivity.

CIS Industrial Services offers a comprehensive range of Standard and Specialty Bearing Grease, System Automatic Lubricators, Manual Dispensing Tools and Lubricant (Oil and Grease) Analysis and Testing Tools.